CopraEasyMill NP
Isostatic, powder-metallurgical manufactured hard Co/Cr blank
Optimum homogeneity due to isostatic high pressure manufacturing process. Minimal bur wear out due to extremely high homogeneity without “hard islands” and casting segregations as with common Co/Cr blanks. Higher milling speed due to better machinability (like titanium) and lower Vickers hardness. Up to 50% shorter process time in your milling system.
The Facts
- optimal homogeneity due to isostatic high pressure manufacturing process
- minimal mill wareout due to extrem high homogeneity without casting segregations
- Nickel- and beryllium free, especially configurated for the requirements of the CAD/CAM technology
- unrestrictedly laserable
- higher milling speed due to better grindability and lower Vickers hardness
- up to 50% shorter process time in your milling system
Blanks from 12 mm with Step | Unit |
CopraEasy Mill NP CoCr-Blank 98 Ø x 8 mm | 1 |
CopraEasy Mill NP CoCr-Blank 98 Ø x 10 mm | 1 |
CopraEasy Mill NP CoCr-Blank 98 Ø x 12 mm | 1 |
CopraEasy Mill NP CoCr-Blank 98 Ø x 13,5 mm | 1 |
CopraEasy Mill NP CoCr-Blank 98 Ø x 15 mm | 1 |
CopraEasy Mill NP CoCr-Blank 98 Ø x 16 mm | 1 |
CopraEasy Mill NP CoCr-Blank 98 Ø x 18 mm | 1 |
CopraEasy Mill NP CoCr-Blank 98 Ø x 20 mm | 1 |
CopraEasy Mill NP CoCr-Blank 98 Ø x 24,5 mm | 1 |